Vladimir's Models ELF, Инструкция по сборке

Страница: 9 / 10

ELF – Assembly Guide © Vladimir’s Models &
HyperFlight
9
1
2
Program the transmitter and
fly!
Set the centre of gravity initially to 75mm from
the front edge of the wing at the root. Add lead
weight as required. Advanced fliers move the
CG back after the test flights if this suits your
flying style.
Program as much rudder throw as possible, at
least 20mm each side.
Set horizontal stabiliser (tail plane) to be
parallel to the boom. Program 9mm of up
elevator (measured at the root trailing edge),
and 9mm of down elevator. Optionally set up a
rate switch to reduce throws for launch.
Start with gentle side arm launches. When trimmed
try 360º launches. Let the model balance itself in the
wind, and make a 360º turn, releasing into the wind.
Do not cantilever the wingtip to hold it against the
wind
– this will crack the tip.
Fly safely, do not launch near others.