Vladimir's Models ELF, Инструкция по сборке

Страница: 2 / 10

ELF – Assembly Guide © Vladimir’s Models &
HyperFlight
2
ELF - a low weight mosquito class 1m span discus launched glider.
The ELF allows the pilot to soar in small places as never before.
ELF’s high tech construction makes the model stronger and lighter.
High prefabrication allows the model to be assembled in one evening.
The ELF gives a lot of fun in a small package!
Ready to fly weight of
only grams!
(Dependent upon R/C, battery and construction.)
HyperFlight Notes
If you don’t want to use the SmartLipo shown in this
manual we have sourced some alternative batteries.
Don’t worry about a switch, just plug in the battery
when flying.
If using 2.4GHz RC use the Elf 2S 180 LiPo battery
and SD100 servos. No voltage regulator is required
because all modern receivers and these servos can
work fine on this voltage (8.4V). This will give over
2.5hrs RC duration on one charge.
If using 35MHz RC use the Losi 150 NiMH battery,
and any suitable servos, though we would highly
recommend the SD100 or the Nuke 3 - the only
servos with the good centring required by this high
performance model. This will give about 2hrs duration.