Vladimir's Models 36083, Рекомендации по сборке

Страница: 14 / 19

www.modellmarkt24.ch
Y OD A
R ecommendations for assembly
14
- T he flaps have the same horns as in Snipe 2. ball head screws are screwed through the holes in the
fuselage with a 2.5 mm wrench. Use wrench without sphere.
- T o screw the horn, you need to turn the flap down 18 degrees.
- W e have to fix wing by two M3 screew: the longer screw for front and shorter to the back side.
2.5 R udder and E levator installation.
W ith a knife cut the slots in the elevator and rudder
in these locations. (F ig. 2.1 - 2.2).
E levator horn is exactly in the center (along the
axis of the stabilizer mounting holes) as the position
must coincide with the slot in the pylon and tail boom.
Horns must be glued full depth to elevator.
L iquid superglue Glue Horns in elevator and
rudder..
Note:
- the maximum height of the elevator horn is 15
mm (F ig. 2.3)
F igur e 2.1 - B ondi ng elevator hor n
www.modellmarkt24.ch