VKI Technologies Eccellenza Express Скачать руководство пользователя страница 80

Страница: 80 / 84

Eccellenza Express – Operating Manual

August 8, 2013

MESSAGE DISPLAYED

CAUSE

POSSIBLE REMEDIES

Factory Settings
Version Error

The version of Factory
Settings is not compatible
with the machine model.

•

Load the proper version of Factory

Settings.

Filling Water Tank

The water tank is filling.

•

Normal operating message and does

not indicate an error.

Finding Brewer Home

Brewer is cycling to find
the home (starting)
position.

•

Normal operating message and does

not indicate an error.

Heating Water

Water inside the hot
water tank is heating.

•

Normal operating message and does

not indicate an error.

LCD Error

An error has been
detected with the LCD
display.

•

Verify the wiring connections to the

LCD display.

•

Replace the LCD display.

Money System Error

The coin changer is not
being detected.

•

Verify the wiring connections at the

control board and inside the changer
unit.

•

Replace the defective coin changer.

Overflow Error

A water overflow has
been detected.

•

Empty and dry the overflow/cup tray.

•

Verify the water level probe

adjustment. They may be set too high
allowing too much water into the tank.

•

Water level probes may need to be

cleaned.

•

Inlet valve may be leaking,

constantly allowing water to enter the
tank. Replace the inlet valve.

•

Water in the tank may be boiling.

Lower the water temperature setting.

Overheat Error

The water tank is
overheating.

•

Check the temperature settings in

the set-up.

•

The temperature probe may need to

be replaced.

PnB not Detected

The control board is not
being detected.

•

The USB cable is not connected to

the control board or the expansion
board. Verify the connections.

Port J10 Not Detected

Wiring harness is
disconnected from port 10
on the control board.

•

Reconnect the wiring harness to port

10 on the control board.

Port J23 Not Detected

Wiring harness is
disconnected from port 23
on the control board.

•

Reconnect the wiring harness to port

23 on the control board.

Powersaving Mode –
Press Start to Exit

The machine is in
Powersaving Mode.

•

Press the Start button to exit

Powersaving Mode.

Содержание Eccellenza Express





















































































Результаты поиска

Содержание Eccellenza Express

Отзывы:

Похожие инструкции для Eccellenza Express

Бренды по названию

Популярные бренды

VKI Technologies Eccellenza Express, Руководство по эксплуатации

Результаты поиска

Содержание Eccellenza Express

Отзывы:

Похожие инструкции для Eccellenza Express

Бренды по названию

Популярные бренды