To disable upload alert function.
7. Sleep Function
(Lowest Power Consumption)
7.1 Interval Sleep
Device will go to deep sleep mode and wake up after appointed interval, and stay awake
for 12 mintues. If there is no new commands received in 12 minutes, device will go back to
deep sleep mode for the next set interval.
Note: System will shut down GPS and GSM module during deep sleep period, so no call
or SMS can be received or responded.
SMS
：
*sleep*1-99*
1-99 refers to the hours of appointed sleep interval.
Example
*sleep*6* means to enable device to go to deep sleep mode and wake up in every 6 hours.
7.2 Motion Sleep
Motion Sleep function enables device to stay in deep sleep mode and wakes up
once motion is detected. System will upload the current location of the device. If
motion continues, system will stay on and operate the previous tracking settings. If
there is no further motion detected, device will go back to deep sleep in 12 minutes.
And the circle repeats.
Note: System will shut down GPS and GSM module during deep sleep period, so
no call or SMS can be received or responded.
SMS:
*sleepv*
To enable motion sleep function.
SMS:
* sleepoff*
To turn off motion sleep and interval sleep function.
8. Immobilisation
Immobilisation function suitable for models support fuel cut function only. It enables device
to cut off the fuel supply of the engine remotely when speed is under 20KM/hour. The
vehicle can not be started again after device operating the fuel cut command. Please
check your models number in Hardware Specification to confirm.
SMS: *engineoff*
To enable fuel cut function.
