Note:
1. Check function is able to work with routetrack and Checkgsm functions at the same
time.
2. System is default as *checkm*4320*. 1 location will be uploaded to server every 72
hours.
3. Location will be uploaded to server when device is in motion.
4.3 Check WiFi/GSM Location (Low Power Consumption)
Checkgsm function enables device to upload ONLY the WIFI/GSM location in appointed
interval of time. Data will be uploaded to server on both occasions, i.e, if the device is
in
motion or not in motion.
If WiFi location is invalid, system will update the closest cell
tower location instead.
And this function can be used with routetrack and Check function at the same time.
SMS:
*checkgsm*5-1800*
5-1800 represents the the number of minutes of Checkgsm’s data upload interval,
default
as off
; rate should not be less than 5.
Example
*checkgsm*30* means uploading GSM data every 30 minutes.
3.4 Track Off
Track off will end all the tracking functions, including routetrack, checkm, checkgsm, timing
locate and period locate.
SMS
：
*trackoff*
To turn off all tracking functions, including routetrack, check, checkgsm,.
5 Upload Alert
The upload alert function enables device upload alert status to the server including
motion
alert,
ACC on/off alert,
bad battery alert, low battery alert
and
wire cut alert
etc. User
can check alert status on the tracking website or message section in app.
This function is default as ON.
SMS
*uploadalert*on*
To enabled upload alert function.
SMS
*uploadalert*off*
