C
Press the MENU button. The main page appears on the screen.
Set desired ring sound and volume, brightness, contrast and colour.
Set language, current time and date and items to be displayed.
Choose a desired item with the buttons and press
.
Cursor jumps to the current value. Change the value with
And press
.
When setting a ring sound and volume, a test signal rings,
until the highest or lowest value is reached.
When setting brightness, contrast and colour, image from the camera and
adjusting bar appear on the screen. The main page returns after 10s of idle.
MENU
MENU
To set date and time, choose Clock and press MENU.
The following page appears:
Choose a desired item with the buttons and press
.
Change the value with and press
.
Choose
and press
to save changes and exit, or choose
and press
to exit without save. The main page appears.
To enable / disable readout of time, date and day, choose
and press
. The following page appears:
Choose an item with and press
.
Choose
or
with and press
.
Choose
and press
. The main page appears.
To return into stand-by mode, choose
on the main page and press
Stand-by mode engages as well automatically after 60 s of idle.
MENU
MENU
OK
MENU
Cancel
MENU
Display
MENU
MENU
yes
no
MENU
OK
MENU
OK
MENU
Menu
OK
Ring volume
Brightness
Contrast
Color
Clock
Display
Ring sound
01
32
19
22
20
Language
Eng
Cursor
Current
values
Display
OK
Time
Date
Day
yes
yes
yes
Current
values
Clock
Cancel
Year
Month
Date
Hours
Minutes
OK
03
11
11
10
30
Current
values
IMAGE RECORDING / VIEWING
REC
To record
REC
To record
automatically
AWAY
Next record is available only after 90…100 sec.
REC
MENU
AWAY
Viewing
Display
AWAY
A built-in image memory module provides the following functions:
- Automatic recording of visitor's image when a call signal comes from the doorstation (in AWAY mode)
- Power LED blinks when new images are recorded (in AWAY mode)
- Recording of visitor's image at pressing the
button (in intercom mode)
- Viewing of recorded images
- Saving of all data and clock settings in case of power failure.
The recording module capacity is 32 images. Images are always recorded in B&W with either B&W or colour camera.
•
an image, press the
button (AWAY mode should be off).
Current time & date indication disappears for a while. After that it is possible to record the next image.
When video memory is full, then a new image replaces the oldest one.
•
visitors’ images
press the
button.
The LED illuminates with orange light (AWAY mode). In10 sec the Terminal is ready to record an image.
If a call comes, a visitor's image will be recorded after 3 sec delay.
The Power LED blinks with orange/green light when new images are recorded, but not viewed.
The , ,
and
buttons do not function in AWAY mode. Power failure does not reset AWAY mode.
To exit AWAY mode press the
button once - the LED illuminates with green light.
•
of recorded images is possible only if AWAY mode is off (the LED is green).
Press the (previous) or (next) button. The newest image with its number (-01) and time & date
of recording appears on the screen. Previous image is number -02 and the oldest one is -32.
Time & date indication depends on
setting in Menu. The button does not function while viewing goes on.
To escape viewing press the
button once (AWAY mode does not turn on) or do not press any button for 60 sec.
Viewing is cancelled automatically if a call comes. Just pick up the handset and talk.
Press and hold to engage sleep mode. Rings and buttons are disabled, except for . Press it again to awake.
