FUNCTIONAL CHECK
PROGRAMMING
1. Lock type
ML
EL
2. Unlocked state duration (1 to 12 seconds)
3. Volume of messages (Minimum / Medium / Maximum)
Medium
A
the
the
Adjust brightness, contrast and colour, if needed.
There are two modes of programming: system setup and service settings.
Electromagnetic lock (
) is released when voltage across its terminals is switched off.
Electromagnetic lock is set by default.
Electromechanical lock (
) is released when voltage across its terminals is switched on.
Default setting is 7 seconds.
1 second is recommended for electromechanical lock.
Default setting is
System setup
Before switching the power on verify all electric connections.
Turn the power supply on. The lamps illuminate on each side of the camera.
Press the
button on the doorstation - a beep sounds at
apartment monitor while the button remains
pressed, image appears on
screen.
Pick up the handset and check duplex intercom. Hang up the handset when finished.
=
=
Figure 2 - Doorstation wall-mounting
