VIZIO Universal Remote Control User Guide
Version 8/6/2004
9
3.1.2.1 - Programming for DVD Player
1.
Manually turn on the DVD player.
2.
Press the DVD button on the remote
control.
3.
Press and hold the SETUP button
until the LED LIGHT flashes twice.
4.
Find the programming code for your DVD player in the code list in the back
of this book and enter it using the number buttons. If the code is accepted,
the LED flashes twice after the last digit is entered.
If the LED does not flash twice, repeat Steps 2 through 4 with the next code
listed for the component and manufacturer.
5.
Point the remote control at the DVD player and press the POWER button.
The DVD Player will turn off.
3.1.2.2 - Programming for the BRAVO DVD Players
1.
Press the DVD button on the
remote.
2.
Press and hold the SETUP button
until the LED LIGHT flashes twice.
3.
Press 9 8 7. The LED flashes
twice.
4.
Enter the appropriate program code for the BRAVO D1 (0116) or the
BRAVO D2 (0117) DVD Player.
5.
Point the remote control at the DVD player and press the POWER button.
The DVD Player will turn off.
If the code was entered incorrectly, follow the following steps to reprogram the
DVD button for the BRAVO DVD players.
1.
Press and hold the SETUP button until the LED LIGHT flashes twice.
2.
Press 9 8 2. The LED LIGHT will flash four times.
3.
Then repeat steps 1 through 5 in the above section.
The remote control should now recognize the BRAVO DVD players.
Note: If your DVD player does not respond, try all the codes for your brand.
If the codes do not work, or your brand is not listed, see “Searching for
Component Codes”, page 11. Sometimes a code listed will only
include limited functions. Try other codes that may include more
functionality.
