VIZIO Universal Remote Control User Guide
Version 8/6/2004
12
3.4 - Changing Volume Lock
The remote control is set to control volume through your TV while in cable (CBL),
DVD, satellite (SAT) and VCR component modes. Use the volume lock if you
want to control the volume for all components through a specific component. For
example, you want to control volume for all components through the tuner (TNR).
To change the volume lock:
1.
Press and hold the SETUP button until the LED flashes twice.
2.
Press 9 9 3. The LED flashes twice.
3.
Press the component button that you want (TNR) once. The LED flashes
twice. Volume will now be controlled through the tuner for all components.
3.5 - Teaching the Remote Control New Functions
The VIZIO Universal Remote Control can learn up to 25 additional functions from
the component’s original remote control. For example, your DVD player remote
control has a scan function that you may use frequently. Since there is not a
scan button on the VIZIO Universal Remote Control, you can assign a button and
use the remote to teach the remote control the scan function.
To teach the remote control a new function:
1.
Press and hold the SETUP button on the remote control until the LED
flashes twice.
2.
Press 9 7 5. The LED flashes twice.
3.
Press the component button that you want (DVD) once.
4.
Press the button that you are assigning the new function to. The LED
flashes quickly while it is waiting to receive the signal from the teaching
remote.
5.
Hold the teaching remote control approximately 1-inch (2.54 cm) from the
remote control making sure that the infrared ports are lined up. Then press
the button on the teaching remote that you want the remote to learn. The
LED flashes twice.
6.
Press the SETUP button to exit learning mode.
Note: Make sure that you have already programmed the remote control for
the component. See “Programming the VIZIO Universal Remote
Control” on page 8. Make sure that area lighting is not too bright or it
will interfere with the learning process.
