Vizio VP503 Скачать руководство пользователя | Manualshive

Страница: 5 / 80

background image

VIZIO

®

VP503 HDTV10A User Manual

Version 5/27/2008

5

www.VIZIO.com

Additional Certified Accessories

Additional Certified Accessories

Additional Certified Accessories

Additional Certified Accessories for the VIZIO

for the VIZIO

for the VIZIO

for the VIZIO

VP503

VP503

VP503

VP503 HDTV

HDTV

HDTV

HDTV10A

10A

10A

10A are sold separately

are sold separately

are sold separately

are sold separately

Wall Mounts
High Definition Cables
Extra or replacement Remote
VIZIO also offers Installation Services and Extended Warranty Services for your VIZIO VP503 HDTV10A

To purchase or inquire about additional accessories and services for your VIZIO product, visit our web
site at

www.VIZIO.com

or call us toll free at 888-VIZIOCE (888-849-4623)

Installation Preparation

Installation Preparation

Installation Preparation

Installation Preparation

Please read this user manual carefully before installing your VIZIO HDTV.
The power consumption of the TV is up to 400W, please use the power cord designated for TV.  When an
extension cord is required, use one  with the correct power rating.  The cord must be grounded and the
grounding feature must not be defeated.
The TV should be installed on a flat surface to avoid tipping.  For proper ventilation, you must allow space
between  the  back  of  the  TV  and  the  wall.    If  you  would  like  to  mount  your  TV  on  the  wall,  please  see
below ‘Preparing Your PLASMA HDTV for Wall Mounting’ for additional information.  Avoid installing the
TV  in  places  with  high  humidity,  dust  or  smoke  so  as  not  to  shorten  the  service  life  of  the  electronic
components.
Install  the  TV  in  landscape  orientation;  any  90˚  clockwise  or  counter-clockwise  installation  may  induce
poor ventilation and excessive component damage.
The VIZIO VP503 HDTV10A can either be kept on the stand base or mounted on the wall for viewing.  If
you choose to mount the VP503 HDTV10A on the wall, please refer to “preparing  your PLASMA HDTV
for wall mounting” on page 6.

VIZIO  offers  professional  installation  services.    Please  contact  VIZIO  for  more  information  on  these
services at 888-VIZIOCE (888-849-4623) or

www.VIZIO.com

.

Attaching the Safety Strap

Attaching the Safety Strap

Attaching the Safety Strap

Attaching the Safety Strap

For when the VP503 HDTV10A is not mounted on the wall with a Wall Mount, a Safety Strap has been
included to attach the HDTV to the wall to reduce the chance of the HDTV being pulled over. The Safety
Strap should be used with common sense practice such as ensuring that children (or adults) do not climb
up, grabbing the top of the HDTV and pulling it onto themselves.

1.

Fix  one  end  of  the  strap  to  the  wall.    If  you  have  a  drywall
finish  it  is  preferable  to  fix  it  to  a  stud,  using  a  washer
underneath  the  screw  head.    If  you  have  a  solid  wall  you
should use a lag bolt, again using a washer under the nut.

2.

Fix the other end of the Safety
Strap to one of the upper wall
mounting holes on the back of
the HDTV, using a washer
under the screw head.

«
...
3
4
5
6
7
...
»

Содержание VP503

















































































Отзывы:

Нет отзывов

Похожие инструкции для VP503

SCENIUM L37WD14

Бренд: RCA Страницы: 48

Бренд: Vizio Страницы: 52

Бренд: Vizio Страницы: 1

Бренд: Vizio Страницы: 2

Бренд: Vizio Страницы: 24

Бренд: Sceptre Страницы: 10

Бренд: Sceptre Страницы: 55

Бренд: Sceptre Страницы: 55

Бренд: Sceptre Страницы: 62

Бренд: Sceptre Страницы: 65

Бренд: Sceptre Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды