VIZIO VHT210 User Manual
2
www.VIZIO.com
Important Safety Instructions
The Sound Bar is designed and manufactured to operate within defined design limits, and misuse
may result in electric shock or fire. To prevent the Sound Bar from being damaged, the following
rules should be observed for its installation, use, and maintenance. Please read the following
safety instructions before operating the Sound Bar. Keep these instructions in a safe place for
future reference.
To reduce the risk of electric shock or component damage, switch off the power before connecting
other components to the Sound Bar.
Unplug the power cord before cleaning the Sound Bar. A damp cloth is sufficient for cleaning. Do not
use a liquid or a spray cleaner on the Sound Bar. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure compatibility.
When moving the Sound Bar from an area of low temperature to an area of high temperature,
condensation may form in the housing. Wait before turning on the Sound Bar to avoid causing fire,
electric shock, or component damage.
A distance of at least 3 feet should be maintained between the Sound Bar and any heat source, such
as a radiator, heater, oven, amplifier etc. Do not install the Sound Bar close to smoke. Operating the
Sound Bar close to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure
reliable operation of the Sound Bar and to protect it from overheating, be sure these openings are not
blocked or covered. Do not place the Sound Bar in a bookcase or cabinet unless proper ventilation is
provided.
Never push any object into the slots and openings on the Sound Bar enclosure. Do not place any
objects on the top of the Sound Bar. Doing so could short circuit parts causing a fire or electric shock.
Never spill liquids on the Sound Bar.
The Sound Bar should be operated only from the type of power source indicated on the label on the
AC/DC Adapters. If you are not sure of the type of power supplied to your home, consult your dealer
or local power company.
Only power of the marked voltage can be used for your Sound Bar. Any other voltage than the
specified voltage may cause fire or electric shock
The power cord must be replaced when using different voltage than the voltage specified. For more
information, contact your dealer.
The Sound Bar AC/DC Adapters are equipped with a
three-pronged grounded plug (a plug with a
third grounding pin)
. This plug will fit only into a grounded power outlet. This is a safety feature. If
your outlet does not accommodate the three-pronged, have an electrician install the correct outlet, or
use an adapter to ground the Sound Bar safely.
Do not defeat the safety purpose of the grounded plug.
When connected to a power outlet, power is always flowing into the Sound Bar. To totally disconnect
power, unplug the power cord.
The lightning flash with arrowhead symbol within an equilateral triangle is intended
to alert the user to the presence of un-isolated, dangerous voltage within the inside
of the Sound Bar that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and servicing instructions in the
literature accompanying your Sound Bar.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
The wall socket should be located near the Sound Bar and be easily accessible.
