VIZIO VHT210 User Manual
Version 5/2/2010
13
www.VIZIO.com
Chapter 5 Using your Sound Bar
Sound Bar Indicator and LED Status
The blue indicator panel and the LEDs on the front of the Sound Bar lights to indicate status. The blue
indicator panel can be seen through the speaker grill and the LEDs are located in the LED window under
the VIZIO logo. When you press a button on the remote control or on the top of the Sound Bar, the
indicator and LED lights as described below.
Volume Indicators
The number of bars increase as the volume is turned up and decrease as the volume is turned down. .
When the Sound Bar is muted, the indicator blinks at the current volume setting. The indicator will turn off
after five seconds.
Input Indicators
The indicators change to double-bars when changing the input mode. When
INPUT
on the Sound Bar or
the
IN
,
OPTICAL
, or
iPod
buttons on the remote control are pressed, the corresponding indicators begin
flashing:
1. IN (Analog In)
2. Optical
3. iPod
Link LED
—Lights orange and indicates the pairing (or linking) process between the Sound Bar and the
subwoofer. The LED blinks fast to indicate pairing is taking place. When paired, the LED will light solid
orange. If it is not paired the LED will blink slowly. The Sound Bar and Subwoofer are paired from the
factory. See
Pairing
on page 15 for more information on the pairing process.
Dolby Digital LED
—Lights blue when a Dolby Digital signal is detected. The LED flashes orange if
your Sound Bar receives a non-Dolby Digital bitstream audio source, such as DTS. If this happens you
can either select the Dolby Digital audio track on the Blu-ray or DVD source or change the device to
output PCM audio over the Optical / S/PDIF connection. Refer to your device’s user manual for
information.
