VIZIO VA26L HDTV10T User Manual
Version 6/5/2008
43
www.VIZIO.com
Adjusting the TV settings
If you did not set up your HDTV for DTV / TV channels using the Initial Setup screens or if your setup has
changed, you can do so from the
TV
menu.
Tuner Mode
1. Press
MENU
on the remote control or the side of your HDTV, then press
►
repeatedly until the
TV
menu opens.
2. Press
▲
or
▼
to select
Tuner Mode
, then press
◄
or
►
to choose
Cable
or
Antenna
(Air)
depending upon which equipment you have connected to the DTV / TV Input.
3. Press
EXIT
to exit the OSD.
Auto Search
Your HDTV can scan for channels in your area and store the channel information in the channel list. If a
channel does not have a signal, your HDTV skips that channel. When you press CH
▲
or CH
▼
, your
HDTV changes to the next channel in the channel list.
1. Press
MENU
on the remote control or the side of your HDTV, then press
►
repeatedly until the
TV
menu opens.
2. Press
▲
or
▼
to select
Auto Search
, then press
►
. The
Auto Search
screen opens and begins
searching for analog and digital channels.
3. When the channel search is complete, press
EXIT
to exit the OSD.
