ENG - 21
Mode & Level Settings
Function
LED Behavior
Description
Input Search
The LED indicator
color will change
per specific input.
SETUP > Input Search > OK
to initiate an automatic input detection sequence. This is the
same as a long key press of the
INPUT
button on the remote. Specific inputs will show a
different LED color:
•
AUX In: Green
•
AUX VA: Violet
•
Digital Optical: Red
•
HDMI (ARC): Magenta
•
Bluetooth: Blue
•
USB: Orange
Program Remote
Learn
Waiting to learn:
Flash from bottom
to top and back
continuously.
SETUP > PrgRemote >
Use the
Next/Previous
buttons and
OK
button to toggle and
select and program your TV remote to control the
Volume Down
,
Volume Up
, and
Mute
functions on your sound bar. See the
Programing the Sound Bar on page 24 section for
more information.
Power LED
Power LED On
SETUP > PwrLED >
Use the
Next/Previous
buttons and
OK
button to enable/disable the
Power LED.
Power LED Off
Reset Audio or
Reset All
All LEDs will flash
3 times when
settings are reset.
SETUP > Reset Audio
or
Reset All >
Use the
Next/Previous
buttons to reset either Audio
or All settings. Press the
OK
button to select.
Audio
- Only audio settings, such as bass and treble levels, will be reset.
All
- All paired Bluetooth devices will be unpaired and all settings will be lost. All
programmed IR remotes will also be removed. See the
Factory Reset on page 23 for
more information.
Speaker Test
—
SETUP > Spkr Test > OK
to activate the speaker test function. A voice will begin calling out
each speaker beginning with
left front (Left Front, Center, Right Front, Right Rear, Left Rear,
and subwoofer-white noise). If any of these are missing, check the connection and run the
speaker test function again.
Input Srch
PwrLED
Reset All
Prg Remote
Spkr Test
