ENG - 24
Programming the Sound Bar
You can program your sound bar to accept TV remote IR commands.
• Press the
SETUP button on the remote, then use the Up/Down buttons to navigate to Prg Remote.
• Use the
Next/Previous buttons to toggle through Learn Vol -, Learn Vol +, and Learn Mute.
HOME THEATER DISPLAY | QUICK START GUIDE
Installation Guide | Models:
Turn off your TV speakers when
programming your sound bar.
Function
LED Behavior
Description
Learn Volume Down
Waiting to learn:
Flash from bottom
to top and back
continuously.
Press the
OK
button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the
Volume Down
button on the TV remote control.
Learn Volume Up
Press the
OK
button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the
Volume Up
button on the TV remote control.
Learning confirmed:
All of the LEDs will
blink twice.
Learn Mute
Press the
OK
button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the
Mute
button on the TV remote control.
Learn Vol-
Learn Vol+
Learn Mute
Point both the sound bar and TV
remotes towards the front of the
sound bar when programming.
