VIZIO SV420XVT1A User Manual
Version 6/2/2008
10
www.VIZIO.com
Chapter 1
Basic Controls and Connections
1.1
Front Bezel
POWER ‘VIZIO’ LIGHT
– The VIZIO name lights white
when powered on and orange when powered off.
REMOTE CONTROL SENSOR
– This is the window
through which all of the remote control signals pass to
the sensor. Point the remote control directly at this
window for the best response to the remote signal.
1.2
Right Side Panel Controls
POWER (
)
– Switch the SV420XVT1A on by pressing the button once. Press the button again to
turn the SV420XVT1A off.
MENU
– This button activates the On Screen Display (OSD). If a sub-
menu is active, pressing this button will return to the previous menu level.
C/-
– Use these buttons to step up or down the TV channels.
While the OSD is active, these buttons
function as up and down controls in the
OSD menus.
/-
– Use these buttons to
increase or decrease to the speaker
volume. While the OSD is active, these
buttons function as left and right controls
in the OSD menus.
INPUT (ENTER)
– Repeated pressing of
this buttons steps through the input
sources in the following sequence: TV,
AV1, AV2 (S-Video), Component 1,
Component 2, RGB, HDMI1, HDMI2,
HDMI3 and HDMI4. Once you have
stepped through the entire sequence, you
will return to the beginning.
Additionally, when the OSD is active, this
button confirms the menu function to be adjusted. When the OSD is not active, this button will show the
current input selections.
TX INPUT
– This slot is used only when upgrading your TV to Dolby Digital 5.1wireless surround system.
Do not insert any object into the slot which may compromise the integrity and functionality of
your TV. The manufacturer’s warranty does not cover user abuse or improper use of this input.
