8
7
Top
Top
Remove the battery cover by gently
Insert the included batteries and gently
sliding it away from the remote.
slide the battery cover back into place.
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
Turn on your TV and sound bar. The sound bar will automatically
9
begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling
in pairs through inputs until an audio source is detected.**
Tip:
Pressing the
INPUT button will stop
the auto detect function.
Power
Input
You can press the
INPUT button to switch between audio
sources. For example, if you connected your TV to AUX, set the
sound bar to AUX.
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
English - 15
