English - 25
PROGRAMMING THE SOUND BAR
You can program your sound bar to accept TV remote IR commands. Press the Menu button on the remote, then use
the Up/Down buttons to navigate to Prg Remote. Use the Next/Previous buttons to toggle through Learn Vol -, Learn
Vol +, and Learn Mute.
Function
LED Behavior
Description
Learn Volume
Down
Press the
Play button to put the sound bar into learning mode. While the sound bar is
in learning mode, press the
Volume Down button on the TV remote control. All of the
LED Indicators on the sound bar will flash two times indicating that it has successfully
recognized the TV remote.
Learn Volume Up
Press the
Play button to put the sound bar into learning mode. While the sound bar is
in learning mode, press the
Volume Up button on the TV remote control. All of the LED
Indicators on the sound bar will flash two times indicating that it has successfully recognized
the TV remote.
Learn Mute
Press the
Play button to put the sound bar into learning mode. While the sound bar is in
learning mode, press the
Mute button on the TV remote control. All of the LED Indicators
on the sound bar will flash two times indicating that it has successfully recognized the TV
remote.
Learn Vol+
Learn Mute
Learn Vol-
(Waiting to learn)
Flash from bottom
to top and back
continuously.
All of the LEDs
will blink twice to
confirm.
Turn off your TV speakers when
programming your sound bar.
Point both the sound bar and TV
remotes towards the front of the
sound bar when programming.
HOME THEATER DISPLAY | QUICK START GUIDE
Installation Guide | Models:
Angle