English - 12
2
Connect the power cable to the sound bar
AC
IN as shown.
Plug the power cable into an electrical outlet.
The sound bar will automatically begin
searching for an active input.*
The LED indicators on the front of the sound
bar will begin cycling in pairs through inputs
until an audio source is detected.**
Front
Top
Back
Side
Angle
Back of Sound Bar
HOME THEATER DISPLAY | QUICK START GUIDE
Installation Guide | Models:
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must do a Factory Reset (see the Using Button
Combinations section for more information) or press and hold the INPUT button for 3 seconds.
Tip:
Pressing the
INPUT button will
stop the auto detect function.
