ENG - 12
Using Button Combinations
There are other functions that are triggered by different button combinations on the sound bar.
Function
LED Behavior
Description
Factory
Reset
All LEDs will
flash 3 times
Reset the sound bar to the factory default settings. To perform a Factory Reset,
Press and Hold
the
Bluetooth
( ) and
Volume Down
(—) buttons for 5 seconds.
Note
: This will erase all settings and preferences that you have set.
VIZIO TV Remote
Control
Enable VIZIO
TV remote
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
of the sound bar. To enable/disable this function,
Press and Hold
the
Power
( ) and
Volume Up
( + ) buttons for 5 seconds.
Disable VIZIO
TV remote
Eco Power Mode
Enable
Eco Power
When the Eco Power mode setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar will remain
powered on until you turn it off. To enable/disable this function,
Press and Hold
the
Power
( ) and
Volume Down
(—) buttons for 5 seconds.
Note:
Eco Power Mode setting is
ON
by default.
Disable
Eco Power
Speaker Test
—
Press and Hold
the
Bluetooth( )
and
Volume Up (+)
buttons for 5 seconds. A voice
will begin calling out each speaker beginning with left (left and right). If any of these
are missing, check the connection and run the speaker test function again.
Buttons are located here.
Front
Top
Back
Side
Angle
