Vizio SB2020n-J6, Руководство пользователя

Страница: 17 / 32

ENG - 11
Using Button Combinations
There are other functions that are triggered by different button
combinations on the sound bar.
Function LED Behavior Description
Factory
Reset
LED will flash 3 times.
Reset the sound bar to the factory default settings.
To perform a Factory Reset, Press and Hold the Bluetooth ( ) and Volume Down (—)
buttons for 5 seconds.
Note : This will erase all settings and preferences that you have set.
VIZIO TV Remote
Control
High tone double beep: On
Low tone double beep:
Off
Enable/disable the use of a VIZIO TV remote control to power on and adjust the volume
of the sound bar.
To enable/disable this function, Press and Hold the Power ( ) and Volume Up (+)
buttons for 5 seconds.
Eco Power Mode
High tone double beep: On
Low tone double beep: Off
When the Eco Power mode setting is enabled, the sound bar will automatically
power down after a period of inactivity. When disabled, the sound bar will remain
powered on until you turn it off.
To enable/disable this function, Press and Hold the Power ( ) and Volume Down (—)
buttons for 5 seconds.
Note: Eco Power Mode setting is OFF by default.
Speaker Test —
Press and Hold the Bluetooth( ) and Volume Up (+) buttons for 5 seconds. A
voice will begin calling out each speaker beginning with left (left and right). If any of
these are missing, check the connection and run the speaker test function again.
Buttons are located here.