Vizio SB2020n-J6, Руководство пользователя

Страница: 12 / 32

ENG - 6
After turning on both your TV and sound bar, it will automatically begin searching for an active input. *
The LED indicator on the front of the sound bar will begin cycling in different colors through inputs
until an audio source is detected.
**
You can press the INPUT button to switch between audio
sources. For example, if you connected your TV to Optical, set
the sound bar to Optical.
3
Remove the battery cover by gently
sliding it away from the remote.
4
Insert the included batteries and gently
slide the battery cover back into place.
5
Top Top
Input
Power
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature
again, you must do a Factory Reset (see the
Using Button Combinations on page 11 for more
information) or press and hold the INPUT button for 4 seconds .
When needed, VIZIO recommends replacing the batteries that came with
this remote with two, new Duracell ‘AAA’ alkaline batteries.
First-time Setup
Tip: Pressing the INPUT button will stop the auto
detect function.