background image

VIZIO L20 User Guide 

 

Version - 2/21/2005 

33 

www.vizioce.com 

 

Control buttons do not work 

Press only one button at one time. 

Snow appears on screen 

Check your antenna connection. 
Check TV / CATV selection. 

There is not any sound, 

Check your audio connection. 
Press MUTE on the remote control again, so that MUTE 
disappeared from the screen. 
Check your audio settings, your TV audio may be set to SAP 
or minimum. 
Press the (Up) key on your remote control. 
Make sure that headphones are not connected. 

Remote control does not work. 

Make sure batteries are inserted correctly. 
Batteries could be weak. 

 

4.3 - Telephone & Technical Support  

Products are often returned due to a technical problem rather than a defective product that may 
result in unnecessary shipping charges billed to you. Our trained support personnel can often 
resolve the problem over the phone. For more information on warranty service or repair, after the 
warranty period, please contact our Support Department at the number below.  
 
Quality service and consistent technical support are integral parts of V's commitment to service 
excellence. V's service representatives are dedicated to assist you with the utmost in customer 
satisfaction. To better assist you, please call toll free or contact us via email.  
 

Tel: (714) 668-0588, 7am-4pm PST Mon - Fri 

Or E-mail: [email protected] 

 

Corporate Contact Information 

V, Inc. 

320A Kalmus Drive  

Costa Mesa, CA 92626  

Tel: (714) 668.0588 Fax: (714) 668-9099  

Web: 

www.VINC.com

 

 

Содержание L20










































Отзывы: