viZaar INVIZ MATRIX, Краткое руководство

Страница: 17 / 23

1 Structure and start-up
:: 1.3 Quick reference, initial setup and operation
Shutting down the system
Please follow further advice to ensure a safe
shutdown of the system:
1. Touch the OFF symbol on your touch screen
(the OFF symbol finds itself on the left bottom
of every menue).
2. After pushing OFF, a menue occurs on the
touch screen. Now select if you want to turn
off your system of return to operation.
If you want to turn off your system through the
setup menue, go to „System Backup and Shut-
down“ and push „System Power Off“.
After pushing „System Power Off“, please wait
for the shutdown screen to occur and turn off
your system with the main switch.
For turning off the system in any another
menue, follow further instructions.
1. Touch the OFF symbol on your touch screen
(the OFF symbol finds itself on the left bottom
of every menue).
2. After pushing OFF, a menue occurs on the
touch screen. Now select if you want to turn
off your system of return to operation.
For further shutdown instructions and backup in-
stallation after system breakdowns please refer
to
„3.7 System backup and shutdown“ on page
36 (only in full operation instructions).
1.4 Operating instructions / E-Reader
1.4.1 Save your operating instructions on
a USB device
To save your operating instructions on a USB de-
vice, plug a USB devicde to the base unit. If con-
nected correctly, the USB symbol will appear.
Press
To confirm the process and remove the USB device,
please press
The button starts to light yellow. When the but-
ton dissapears after a few seconds, the process
was successful. In case the buttons stays active,
please repeat the process.
08 www.vizaar.com
ATTENTION! Always shut down the system
as shown in the operating instructions.
Non-observance of the instruction may
cause system failures and/or data loss! NOTE! When the symbol lights green the co-
pying was successful. When the symbol lights
red three times, please repeat the process.
ATTENTION! Do not remove the USB device
after the process without completing the next
step shown in this operating instructions!