VXS9200B
INSTALLATION GUIDE
PAGE 3 of 3
ELECTRICAL CONNECTIONS
Each horn has two BLACK wires, one attached to one of the screws in the bracket (-) and one attached to the
housing (+).
On the Power Box:
HORN 1: Connect the RED (+) wire to the wire that is attach to the housing then connect the WHITE (-) wire
to the wire that is attached to the screw in the bracket.
HORN 2: Connect the RED (+) wire to the wire that is attach to the housing then connect the BLUE (-) wire to
the wire that is attached to the screw in the bracket.
On the opposite side of the Power Box connect the RED (+) wire to the positive (+) terminal of the battery or
alternator.
WARNING
: We highly recommend that you use a 20A fuse (not provided) to assure that the circuit
remains safe and will not be damaged by excess current.
Connect the BLACK (-) wire to ground, this can be an unpainted metal on the chassis of your vehicle.
OPERATION
To start using the dual snail horn set the vehicle's ignition to the ON position.
The 8 buttons in the control box are momentary switches, each one will produce a different sound while is
pressed. Available sounds: FAST / TOGGLE / MI / RE / DO / ALL-ON / TURN BACK / TELOLET
To stop sound
’s playback release the button.
