VXS9200B
INSTALLATION GUIDE
PAGE 2 of 3
MOUNTING
HORNS
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of
the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive
shaking. Do not attach the horn to any plastic or other flexible material.
Use the provided mounting hardware to attach both horns to the main bracket.
Using the main bracket as a guide estimate and mark the positions for the two holes and then perforate to
size using a drill.
Use the provided mounting hardware to attach the bracket to the vehicle.
CONTROL BOX
Find a mounting location for the control box in which you will have access to the buttons.
Mount the unit on the location chosen using the double-sided tape.
IMPORTANT
: If the control box is going to be installed on a handle bar, use the included handle bar bracket
and four small screws.
POWER BOX
The length of the wire that connects the power box with the control box is 3 Feet (36 inches), find a suitable
mounting location for the power box that is within that length
from the control box’s mounting location.
Mount the unit on the location chosen using two provided screws.
