VXF9C3B
INSTALLATION GUIDE
PAGE 1 of 2
BEFORE BEGINNING YOUR INSTALLATION
Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
9-switch Controller with 6 Feet Fused Harness (Black)
SAFETY INSTRUCTIONS
Never install this air valve to an air tank that controls the air brakes or any other important part on your vehicle.
Make sure your battery ground is detached before getting your installation started.
Ensure that your air system has no pressure before starting the installation.
Direct replacement for the controller included with VXF4CM14B suspension manifold (four corners) air valve.
WIRING
Connect the wire harness of the controller to the manifold, ensure that the two guides of the harness match
the position of the guides in the receptacle.
Connect BLACK wire to GROUND, can be the chassis (unpainted surface) or route a wire directly to the
negative side of t
he vehicle’s battery.
Connect RED wire to the 12V power source, a 5A fuse is already installed on this cable,
IMPORTANT
: Do not remove or install a larger fuse as doing this may damage the unit.
