vivtek QUMI Q6, Руководство пользователя

Страница: 62 / 77

56
Settings 2 Menu
To access the
Settings 2
menu and adjust the settings, perform the following steps:
1. Enter the OSD menu.
2. Press the ◄ or ► button to select the Settings 2 menu.
3. Press the ▲ or ▼ button to move the cursor up and down in the
Settings 2
menu
and press .
4. Press the ◄ or ► button to change values for each applicable setting.
Item Description
Auto Source
Press the ◄ or ► button to enable or disable automatic source
detection.
No Signal Power Off
(min)
Press the ◄ or ► button to automatically turn the projector lamp
off when there is no signal.
Auto Power On Press the ◄ or ► button to enable or disable automatic power on.
LED Mode
Press the ◄ or ► button to select the LED mode for higher
brightness or lower brightness to save LED life.
Reset All
Press to reset all items to factory preset values. See Reset All
on page 57 .
Status Press to enter the Status menu. See
Status
on page 58 .
Advanced 1
Press to enter the Advanced 1 menu. See Advanced 1 on page
59 .
Advanced 2
Press to enter the Advanced 2 menu. See Advanced 2 on page
60 .