EN - 5
English
3.2 Connecting IO cables:
17mm
1. Remove the waterproof connector from the camera, and pass IO wires through the rubber seal
as shown below. Tighten up and install the connector when done.
1
DI-
2
DI+
3
DO-
4
DO+
5
Audio GND
6
Audio Out
2. Use a small-size flat-blade screwdriver to secure IO
wires to the included terminal blocks.
The pinouts are shown below.
Wire range: 1.5mm~1.8mm; 20AWG
Strip length: 6~7mm
Screw: M2
