VIVOTEK
60 - User's Manual
Please follow the steps below to set up a profile:
1. Check
Enable and apply this profile to
.
2. Select the applicable mode: Day mode, Night mode,
or Schedule mode. Please manually enter a range of
time if you choose Schedule mode.
When a span of time is configured using the Schedule
mode, you can configure the Day/Night setting for
controlling the behavior of the IR cut filter during that
time.
3. Configure Exposure control settings in the folowing
columns. Please refer to previous dicussions for
detailed information.
4. Click
Save
to enable the setting and click
Close
to exit
the window.
Exposure Profile: (Only available when the IR cut filter is not set to the Auto mode)
If you want to configure another sensor and exposure setting for an individual day/night/schedule mode,
please click
Profile
to open the Profile of exposure settings page as shown below.
Activated period
: Select the mode this profile to apply to: Day mode, Night mode, or Schedule mode.
Please manually enter a range of time if you choose Schedule mode. Then check
Save
to take effect.
Содержание SD8364E/ -M
Страница 228: ...VIVOTEK 228 User s Manual dependent...