EN - 10
Note:
1. SSID, abbreviated from Service Set Identifier, is the name assigned to the wireless
network. The PZ7132's factory SSID setting is set to "default".
2. Select "Ad-Hoc" wireless mode if you want the PZ7132 to communicate without
using an AP or wireless router.
:
POWER
COLLISION
LINK
RECEIVE
PARTITION
1
2
3
4
5
ADSL/Cable/Hub
AP
For further setup, please refer to user's manual on the software CD.
Configure the Wireless Connection
(PZ7132 only)
7
1. Check the SSID currently set on your wireless access point (AP).
2. Go to PZ7132's Configuration > Advanced mode > Wireless.
3. Type in the SSID consistent with the setting on your AP.
4. Select the Wireless mode as "Infrastructure".
5. Click
Save
. The Network Camera starts to reboot.
PZ7132
6. Wait for the live image is reloaded to your browser. Then, unplug the power cable
and Ethernet cable from the Network Camera.
7. Replug the power cable to the camera. The Network Camera now operates in
wireless mode.
All manuals and user guides at all-guides.com
all-guides.com
