Vivotek MD9560-DH, Руководство пользователя

Страница: 391 / 417

VIVOTEK
User's Manual - 391
© 2019 VIVOTEK INC. All Right Reserved
259
8.31 SmartSD (capability_localstorage_smartsd > 0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<
servername
>/cgi-bin/admin/smartsd.cgi?function=<value>
© 2019 VIVOTEK INC. All Right Reserved
260
PARAMETER
VALUE DESCRIPTION
function getstatus
Function type
getstauts : Information of smartSD internal status return
value as below:
smartsd_lifetime_num :
Accumulated amount of data that has been written
smartsd_lifetime_den :
Card-guaranteed amount of data that can be written
smartsd_lifetime_rate :
The ratio of smartsd_lifetime_num to
smartsd_lifetime_den.
It means the accumulated percentage amount of flash
block has been written. The range is from 0 to 100 (unit: %).
The SD card is recommended to be replaced if the
percentage reaches above 90%.
smartsd_spare_block_rate :
Usage rate of spare blocks.
It means the usage percentage of total spare block. The
range is from 0 to 100 (unit: %). The SD card is
recommended to be replaced if the percentage reaches
above 90%.
smartsd_data_size_per_unit :
Size (in sectors) of data to be written when Life
Information1 is updated.
smartsd_num_of_sudden_power_failure :
Indicates how many times power disconnection occurred during write/erase
operations
smartsd_operation_mode :
Enables/disables power-off detection and write error notification
smartsd_attached :
Indicate the smartSD is attached or not.
8.32 Connect to AP (capability_network_wireless > 0)
Note:
This request requires Administrator privileges.
Method:
GET/POST