EN-8
3. Unscrew the zoom controller to adjust the
zoom factor. Upon completion, tighten the
zoom controller.
4. Unscrew the focus controller to adjust the
focus range. Upon completion, tighten the
focus controller.
T
W
∞
N
3
4
5. Tighten the lens cover.
6. Open the back cover.
7. Tear down the aluminum foil vacuum
bag and take out the dessicant bag.
Attach the silica gel to the inner side of
the back cover, then tighten the back
cover. (Please replace the dessicant
bag with a new one if you open the back
cover after installation.)
Note
If you want to use the supplied sun shield for outdoor environments, please follow the steps below to
install:
1. Tighten the supplied two screws.
2. Attach the supplied sun shield to the Network Camera and slide it to the desired position.
3. Fix the sun shield with the supplied two screws.
5
6
7
1
2
3
