VIVOTEK
110 - User's Manual
In the Event settings column, the Servers and Medias you configured will be listed; please make sure the
Event -> Status is indicated as
ON
, in order to enable the event triggering action.
When completed, click
Save
event
to enable the settings and click
Close
to exit Event Settings page.
The new Event / Server settings / Media will appear in the event drop-down list on the Event setting
page.
Please see the example of the Event setting page below:
When the Event Status is
ON
, once an event is triggered by motion detection, the Network Camera will
automatically send snapshots via e-mail.
If you want to stop the event trigger, you can click on the
ON
button to turn its status to
OFF
or click
Delete
to remove the event setting.
To remove a server setting from the list, select a server name from the drop-down list and click
Delete
.
Note that you can only delete a server setting when it is not applied to an existing event setting.
To remove a media setting from the list, select a media name from the drop-down list and click
Delete
.
Note that you can only delete a media setting when it is not applied to an event setting.
