EN - 7
English
1. In addition to the use of WPS function, you can also use a wired connection to manually
set up your wireless configuration.
2. Enter the
Configuration
>
Wireless
>
WLAN
page. Key in the same wireless settings
as those on your router/AP (SSID, Encryption type, and Pre-shared key).
Wireless Connection: Manual Configuration
8
3. When done, click the Save button, disconnect the Ethernet cable and then reboot the
camera (by disconnect and then connect the power cord). The camera should then be
connected over the wireless network. If successfully configured, the camera LED should
turn Green after 1 minute. If the camera LED does not turn Green within 2 minutes,
check your wireless configuration for errors.
