VIVOTEK
User's Manual - 55
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List
to deny access� Please note that those checked connections will only be disconnected temporarily
and will automatically try to re-link again (IE Explore or Quick Time Player)� If you want to enable the
denied list, please check
Enable access list filtering
and click
Save
in the first column.
■ Disconnect: If you want to break off the current connections, please select them and click this
button� Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again (IE Explore or Quick Time Player)�
Enable access list filtering
: Check this item and click
Save
if you want to enable the access list filtering
function�
Filter Type
Select
Allow
or
Deny
as the filter type. If you choose
Allow Type
, only those clients whose IP addresses
are on the Access List below can access the Network Camera, and the others cannot access� On the
contrary, if you choose
Deny Type
, those clients whose IP addresses are on the Access List below will
not be allowed to access the Network Camera, and the others can access�
Filter
Then you can add a rule to the following Access List� Please note that the IPv6 access list column will not
be displayed unless you enable IPv6 on the Network page� For more information about
IPv6 Settings
,
please refer to page 41 for detailed information�
There are three types of rules:
Single
: This rule allows the user to add an IP address to the Allowed/Denied list.
For example:
Содержание FD8361
Страница 1: ......
