Vivotek AP-FXC-0150, Быстрое руководство по установке

Страница: 2 / 2

VIVOTEK INC.
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.
|
T : +886-2-82455282
|
F : +886-2-82455532
|
E : sales@vivotek.com
VIVOTEK USA, INC.
2050 Ringwood Avenue, San Jose, CA 95131
|
T : 408-773-8686
|
F : 408-773-8298
|
E : salesusa@vivotek.com
VIVOTEK Netherlands B.V.
Busplein 36, 1315KV, Almere, The Netherlands
|
T : +31 (0)36 5389 149
|
F : +31 (0)36 5389 111
|
E : saleseurope@vivotek.com
100m
100m 100m 100m
Uplink
AW-FED-0500
PoE switch
Line2
C1 R1 R2
AP-FXC-0150 AP-FXC-0150
POWER Green ON Power link is connected from the PoE source.
Green OFF Power is off.
PoE IN Green ON PoE IN port is connected.
Fast blinking Data is being transmitted or received.
OFF No connection.
OUT# Green ON Port is linked to a powered device.
OFF No device is connected.
1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the extender are not blocked.
3. Use CAT5 or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.
The AP-FXC-0150 is a PoE extender capable of feeding 15.4/30W power to powered devices for a distance of up to 300
meters. Multiple extenders can be cascaded to increase the cabling distance and the number of powered devices.
IMPORTANT :
INTRODUCTION
LED DEFINITIONS
CONNECTION
• 1x PoE extender • 1x Quick Installation Guide
PACKAGE CONTENTS
All specifications are subject to change without noice.
Copyright © 2014 VIVOTEK INC. All rights reserved.
Following are the conditions for making the cabling:
1. Use 18~19Ω, 24AWG CAT5 cables.
2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.
Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.
3. The transaction on the PoE extender consumes 2W of power. Therefore, on Line2, the total power requirement is:
C1*+R1**+R2+(5W***x3).
If the camera consumes 5W, the total consumption is 24W.
* Cn = camera consumption,
** Rn = extender consumption, 2W.
*** A typical 100 meters connection induces a 5W power loss due to resistance.
AP-FXC-0150
AP-FXC-0250_QIG,v1.0_20150120.indd 2 2015/1/27 下午 04:41:59