VIVOTEK
36 - User's Manual
LED Definitions
Item LED status
Description
LED Definition
1
Steady
Red
Powered and system booting, or network
failed
Red
LED off
Power off
Green
LED off
Network is disconnected
2
Steady
Red
and
Green
LED blinks every 1
sec.
Connected to network
3
Green
LED blinks every 1 sec. and
RED
LED
blinks consecutively every 0.15 sec.
Upgrading firmware
4
Green
and
RED
blink
every 0.15 sec,
Green
and
RED
light on, then blink again.
Restoring defaults
5
RED
LED is on,
Green
LED blinks and
RED
LED is constantly on.
Status after a reset (network connected)
Green
and
RED
LEDs are constantly on.
Status after a reset (network
disconnected)
Hardware Reset
The reset button is used to reset the system or restore the factory default settings.
Sometimes resetting the system can return the camera to normal operation. If the system
problems remain after reset, restore the factory settings and install again.
Reset: Press the recessed reset button. Wait for the Network Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks. Note that all
settings will be restored to factory default. Upon successful restore, the status LED will
blink green and red during normal operation.
SD/SDHC/SDXC Card Capacity
This network camera is compliant with
SD/SDHC/SDXC 16GB / 8GB / 32GB / 64GB
and
other preceding standard SD cards.
Содержание 9189 Series
Страница 8: ...VIVOTEK 8 User s Manual Microphone FD9389 Outer View Dome cover...
Страница 101: ...VIVOTEK User s Manual 101...