INSTALLATION
INSTRUCTION
VLMW4065T
CAUTION!
This monitor mount must be securely attached to the vertical wall. If the mount
is not properly installed it may fall, resulting in possible injury and/or damage.
Note: The mounting components and hardware supplied in this package are not designed for installa-
tions to walls with steel studs or to cinder block walls. If the hardware you need for your installation is
not included, please consult your local hardware store for proper mounting hardware for the application.
Unpacking Instructions
Carefully open the carton, remove contents and lay out on cardboard or other protective surface
to avoid damage. Check package contents against the Supplied Parts List in the next page to
assure that all components were received undamaged. Do not use damaged or defective parts.
Important Safety Information
Install and operate this device with care. Please read this instruction before beginning the instal-
lation, and carefully follow all instructions contained herein. Use proper safety equipment during
installation. Please call a qualified installation contractor for help if you don’t understand these
directions or have any doubts about the safety of the installation. If you are uncertain about the
nature of your wall, consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this
instruction. We hereby disclaims any and all liability or damage arising from incorrect assembly,
incorrect mounting or incorrect use of this product.
5
• 4 mm Drill bit
• 8 mm Masonry Bit
• Philips Screwdriver
• Stud Finder
• Wrench or Socket Set
• Carpenter’s Level
Tools Required
S
VESA tandard:
Weight:
Up to
65 kg (1453 lbs)
Up to
600x400
