Vivo Select 8000 Cordless User Guide
Page 6 of 10
Pick up the handset, press the key corresponding to the line that is ringing to receive the call. (The visual light
will flash on the ringing line)
To end the call, place the handset into the base cradle, or press the illuminated line key.
2.
To answer a call using the handset while it is resting on the base
Pick up the handset from the base, the phone will automatically connect to the line.
To end the call, press the active line again or place the handset back on the base.
3.
To answer a call using the speakerphone
Press SPKR or ringing line key to get through a call automatically.
End the call by pressing the SPKR key or line key.
When SPKR and handset are in using, the in use LED will light up steady in red.
Using the handset to place a call
Pick up the handset and select either Line 1 or Line 2, listen for dial tone and dial the desired number directly.
(Available for two line only)
Press the line key again or back the handset into the base to end the call.
Use speakerphone to dial the number out
Press SPKR key or line key and then press the corresponding memory key or the desired number.
Press the SPKR or line key to end the call.
Talking between handset and base unit
When using the handset to talk, press the base SPKR key to convert your conversation into base
speakerphone.
When using the speakerphone, pick up the handset from the base cradle or press the handset blinking line
(Line1 or Line2) to resume connection with the handset.
Three way conference (available for two lines only)
When two lines are on hold, press LINE1, to take LINE1 off hold and resume the conversation. When you
press LINE1 or LINE2, you will get the corresponding line through and another line will remain on hold. To get
three party conferencing just press CONF key.
To end a conference call:
When you are using the handset to talk, press the Line1 & Line2 key or place the handset back on the base
cradle to disconnect both parties.
