2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
ASSEMBLY STEPS
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A
(x1)
Mounting
Bracket
B
(x1)
Ball Head
S-B
(x1)
3/8" Screw
STEP 1
Connect Mounting Bracket
(A)
to exisiting
monitor arm VESA Plate using M4x10mm Screws
(S-E)
, M4 Washers
(S-F)
, M4 Nut
(S-D)
, and
4mm Allen Wrench
(T-A)
.
Phillips
Screwdriver
TOOLS NEEDED
S-A
(x1)
1/4" Screw
6.6lbs
(3kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
S-C
(x1)
5/8" Screw
S-D
(x4)
M4 Nut
S-F
(x4)
M4 Washer
S-E
(x4)
M4x10mm
Screw
T-A
(x1)
4mm Allen
Wrench
T-A
S-E
S-F
A
S-D
