12
Rubber Pad(x10)
S=4mm
J
H
S=2mm
D
S=4mm
H
J
D
STEP 11 - OPTION C: No Extensions
Slide Inner Crossbar (N) into Left Crossbar (J) and Inner Left Crossbar (K). Secure using M6x12 Screw
(S-C) and 4mm Allen Wrench (T-C).
N
S-C
T-C
S-C
H
S-F
T-B
T-B
S-F
Insert the Long Sync Rod (H) into Left Leg (D), extend the rod onto Leg with Motor (E) and tighten the
nut. Tighten set screw on the end of the Long Sync Rod (H) using the 2mm Allen wrench (T-B). Insert
Rubber Pads (S-F) into the desktop mounting holes in the desk frame assembly.
T-C
K
J
D
E
S-F
Loosen the nut on the
Long Sync Rod
(H).
Insert the Long Sync Rod
(H)
into the hex hole
in Leg
(D)
and turn it
counter clockwise until
the it reaches its lowest
postion.
Insert the other end of
Long Sync Rod
(H)
into
the slot on Leg With
Motor
(E)
. Secure the
Long Sync Rod
(D)
to the
slot by tightening the
pre-installed set screw using 2mm Allen Wrench
(T-B).
Retighten the nut
