Vivitek DW882ST Series, Руководство пользователя

Страница: 58 / 76

–
49
–
7.
Reverse steps 1 to 6 to
install the new lamp
module.
While installing, align the
lamp module and ensure it
is level to avoid damage.
Note:
The lamp module must sit
securely in place before
tightening the screws.
The lamp connector must
be connected properly and
place as drawing before
Lamp compartment cover
installation back.
Warning:
Lamp Connector must be installed flush with the connector base as shown in the image below.
A gap between the Lamp Connector and the connector base will cause damage to the projector.
The following images illustrate correct and incorrect Lamp Connector installations.
！
No Gap Gap
Correct Incorrect