manualshive.com logo in svg

Vivitek DU9800Z, Руководство пользователя

Поделиться
Скачать
Vivitek DU9800Z Скачать руководство пользователя страница 54

DU9800Z DLP Projector - User Manual 

 

53 

UM98001117EN00

 

Background 

User can use this function to specify the image displayed on the blank screen when there is no input signal. The 
selectable items are Logo, Black and Blue, the default setting is Logo.

 

 

Startup Logo 

Press ENTER button, and use the 

◄

 or 

►

 button to turn on / off the Startup Logo.

 

 

 

Infrared Remote 

Remote Sensor: 

The default is On. However, there are three conditions that will be suggested to turn off “Remote 

Sensor”; the possible condition is that if the user uses wired control, he can set this function to Off, or that if the 
projector IR location is exposed to the bright sunlight or fluorescence, or that projector control is not controlled by 
remote. If the user would like to reset to On, user can only set by OSD panel or RS-232. 

ID Control Enable: 

This option allows you to enable the projector ID control function. You can turn on this function and 

give an ID number for the projector, then set the same ID number for the remote control to match the projector ID. After 
ID code is set, you can control the specified projector by the remote control. 

Control ID Number: 

Select the option then press the 

◄

 or 

►

 button to set the ID number of the projector, this option is 

selectable when Projector ID Control is enabled. 

 

Trigger 1, 2 

The projector provides a set of trigger output ports for connection to a screen. The user can connect the triggers between 
the screen and projector by a cable. Once the projector is powered on, the screen would be automatically turned on as 
well. There is a 2-3 second delay to activate this function. The selectable aspect ratios are as follows: 

Off:

 Turn off screen trigger. 

5:4:

 Outputs 12V of power on Trigger when Aspect Ratio is set to 5:4. 

4:3:

 Outputs 12V of power on Trigger when Aspect Ratio is set to 4:3. 

16:10:

 Outputs 12V of power on Trigger when Aspect Ratio is set to 16:10. 

16:9:

 Outputs 12V of power on Trigger when Aspect Ratio is set to 16:9. 

1.88:

 Outputs 12V of power on Trigger when Aspect Ratio is set to 1.88. 

2.35:

 Outputs 12V of power on Trigger when Aspect Ratio is set to 2.35. 

Letterbox:

 Outputs 12V of power on Trigger when Aspect Ratio is set to Letterbox. 

Native:

 Outputs 12V of power on Trigger when Aspect Ratio is set to Native. 

Unscaled:

 Outputs 12V of power on Trigger when Aspect Ratio is set to Unscaled. 

Auto:

 Outputs 12V of power on Trigger automatically. 

 

OSD Settings 

Menu Position:

 Adjust menu position through this function. The available position options are at Top-Left, Top-Right, 

Bottom-Left, Bottom-Right and center of the screen. 

Menu Transparency: 

Changes the transparency of OSD Menu. The background color of the OSD can be adjusted 

from a darker solid color to a lighter transparent color. 

 

Time Out:

 Set up the timer to exit OSD menu. The available options are Always On, 10 Seconds, 30 Seconds and 60 

Seconds. 
 

Message Box 

This function allows you to disable the pop-up message on the bottom-right of the screen. 
 

Image Latency 

This function allows you to set image latency. Note that normally the image latency should be set to Normal for best 
picture quality. 

Normal:

 Set image latency to 2 frames. 

Fast: 

Set image latency to less than 1.5 frames. 

Содержание DU9800Z



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды