Vivitek DU8090Z страница 32 Скачать руководство пользователя

Страница: 32 / 58

DU8090Z DLP Projector - User Manual

UM80900217EN02

Connecting to external HDBaseT Transmitter

The projector has a built-in HDBaseT receiver. With HDBaseT Transmitter (optional), the video, RS-232 and LAN

signals can be sent to the projector via a single RJ-45 cable. If the HDBaseT Transmitter you purchased supports the

input and output of the IR remote control, the control signals from the IR remote control can be sent to the DU8090Z

projector via the RJ-45 cable.

Note:



The projector supports the video signal, R-232, IR remote control and the reception of the network control signals

but do not support Power over Ethernet (PoE).



The baud rate will be switched to 9600 automatically. If RS232 command is sent via external HDBaseT transmitter.



If the command is sent via the HDBaseT transmitter, the longest transmission distance is 100 meters. The

projection may be interrupted or interfered, or the control signal cannot be sent if the transmission distance is

exceeded.



Use the RJ-45 Cat5e or above cable and avoid entwining. Entwining may cause damage or interfering signal

transmission, reduce the transmission distance and degrade the image quality.

Содержание DU8090Z



























































Результаты поиска

Содержание DU8090Z

Отзывы:

Похожие инструкции для DU8090Z

Бренды по названию

Популярные бренды

Vivitek DU8090Z, Руководство пользователя

Результаты поиска

Содержание DU8090Z

Отзывы:

Похожие инструкции для DU8090Z

Бренды по названию

Популярные бренды