Ultra Short Throw Lens – Installation Guide
7
8. Tighten the screws to fix the projection lens
Hold the lens and lift it a little
in the opposite direction of gravity
and use wrench to tighten each screw according to the
sequence as below illustration.
Table Installation
Ceiling Installation
Note:
The projection lens is fixed firmly after you tighten the screws; make sure to loosen all of the screws on the
support kits before operating Lens Shift or Lens Center function.
Some of Vivitek projectors may offer wider adjustable shift range for flexibility in installation, the initial position by
Center Lens can get best projected performance please check the performance of the projected image if adjusting
the lens position.
