Ultra Short Throw Lens – Installation Guide
5
3. Turn over the projector to the front as below figure.
.
4. Align the "
↑
" symbol on the lens label with the "* " symbol on the top cover of the projector (align to the center of the
lens hole), and pull in the lens. Make sure the lens is pushed into the holder and turn it clockwise to the "Lock"
position.
Note:
Before installing the lens on the projector, recommend to place the projector on a table and the front of the
projector is aligned with the edge of the table. This can help you installing the projection lens more convenient.
5. Adjust the projecting position of Lens:
a. Plunge in the power cable
b. Turn on the AC switch then turn the projector on by power button.
CAUTION:
Make sure the projective film on the Lens is removed before turning on the projector; the protective film may be melt
during projection then resulting in damage or deformation.
