Vivitek DH976 Series, Руководство пользователя

Страница: 24 / 79

—
16
—
Adjusting the Projector Level
Take note of the following when setting up the projector:

The projector table or stand should be level and sturdy.

Position the projector so that it is perpendicular to the screen.

Remove the Back Foot Holder on the rear adjuster foot before adjusting the projection
angle.

Ensure the cables are in a safe location. You could trip over them.
1.
To raise the level of the projector, lift the projector [A] and press the height-
adjuster button [B] .
The height adjuster drops down [C] .
2.
To lower the level of the projector, press the height-adjuster button and push
down on the top of the projector.
3.
To adjust the angle of the picture, turn the tilt-adjuster [D] right or left until
the desired angle has been achieved.