34
Corner Adj.
Manually adjust four corners of the image by setting the horizontal and vertical values.
1. Press / / / to select one of the four corners and press
Enter
.
2. Press /
to adjust vertical values.
3. Press / to adjust horizontal values.
Position
Displays the position adjusent page. This function is only available when a PC type
input signal is selected.
Phase
Adjusts the clock phase to reduce image distortion. This function is only available
when a PC type input signal is selected.
H. Size
Adjusts the horizontal width of the image. This function is only available when a PC
type input signal is selected.
Digital Zoom
Using the remote control
1. Press on the remote control to display the Zoom bar.
2. Press / to magnify the picture to a desired size.
3. Press
repeatedly to magnify the picture to a desired size.
4. To navigate the picture, press
Enter
to switch to the paning mode and press the
directional
arrows
( , , , ) to navigate the picture.
5. To reduce size of the picture, press
Enter
to switch back to the zoom in/out
functionality, and press
Auto Sync
to restore the picture to its original size. You
can also press
repeatedly until it is restored to the original size.
Using the OSD menu
1. Press
Menu
and then select
Display
menu.
2. Press
to select
Digital Zoom
and press
Enter
. The Zoom bar displays.
3. Repeat steps 3-5 in the section of Using the remote control above.
Содержание DH765Z-UST series
Страница 1: ......
